5G network antenna
Build 5g microwave back to become a sharp weapon Dec,29 2020

Build 5g microwave back to become a sharp weapon

Expected to finish reading in 8 minutes

From a global perspective, microwave back propagation has become a mainstream way of back propagation.

In 2017, sky light research, a third-party market research institution, published the article "5g retransmission, microwave surpasses expectations". It points out that 50% - 60% of mobile base stations in the world are retransmitted by microwave at present. With the acceleration of 5g deployment, the network capacity, complexity and delay requirements are higher, and the number of mobile base stations will increase. Microwave is an important transmission method in the fiber-free scenario, With the evolution of 5g, it will continue to expand.

Ericsson microwave outlook released in 2018 mentioned that the solution of optical fiber and microwave integration is the mainstream way of 4G evolution and 5g return. By 2023, the 40% base stations will be back to wireless transmission. If China, Chinese mainland, Taiwan, Korea and Japan are excluded, the proportion of wireless backhaul will be as high as 65% by 2023, because there are a large number of 4G base stations in Northeast Asia, and their return depends mainly on optical fiber, which will reduce the proportion of global wireless backhaul.

5G nr system building

As mentioned in the report 5g wireless return issued by ETSI in November 2018, wireless return technology has been applied to 50% of base station connections in the world, and it is obvious that wireless return has become an important scheme for 5g rapid deployment and economy.

There are some shortcomings in microwave transmission mode, mainly sight distance transmission, and when there is too much moisture or dust in the air, the quality of microwave signal will be reduced. Of course, this does not affect the share of microwave echo in overseas market.

It can be seen that the 4G era microwave echo is the mainstream echo mode, and the 5g era will continue this mode. However, the inherent characteristics of 5g challenge the microwave return, such as the increase of bandwidth, the scarcity of public frequency band, and the strictness of network experience. Previously, the global microwave return mainly used the 6-42ghz band, with an average return capacity between 50Mbps and 500mbps. Obviously, this is unable to meet the demand of base station return capacity in 5g era. Therefore, E-band begins to appear, i.e. 70ghz-80ghz band.

E-band really provides a strong support for 5g's return. In May 2019, Deutsche Telekom and Ericsson cooperated to achieve 100gbps return rate on the 1.5km E-band microwave link for the first time, which is 10 times of the current commercial microwave return rate and can meet the demand of 5g return.

Huawei occupies the largest share of the microwave transmission market, with a 29% share in the fourth quarter of 2019. Earlier, Ren Zhengfei mentioned in an interview that "there are not many microwave manufacturers in the world, and Huawei is the most advanced", which may be the main reason why Huawei can lead the microwave transmission market.

Because 5g base station needs better return system, the market demand for microwave transmission equipment will reach 17 billion US dollars in the next five years, and only mobile return will drive 70% of the revenue of microwave transmission market, among which the E-band system shipment will grow at a compound annual growth rate of 36% in the next five years.

Opportunities for universal telecommunication service and 5g microwave back transmission

As mentioned above, most of the overseas countries, especially the developed countries, on the one hand, the labor cost is high, on the other hand, the land is private, and the large-scale deployment of optical fiber is very difficult, so the proportion of microwave return is very high. However, China's labor cost is relatively low and the land is public owned, so the difficulty of optical fiber deployment is greatly reduced, forming a large-scale optical fiber laying. Is there no scenario for microwave back propagation in China? It is undeniable that, due to the perfect optical fiber infrastructure, microwave back propagation in China is far from the same trend as that of optical fiber in the same way as overseas, but there are certain application scenarios in which it can still be an important supplement to optical fiber.


(1) The role of wireless backhaul in telecom universal service

As the highest aim of the development of global information and communication industry, universal service has been best implemented in China.

According to the public information, the pilot project of universal telecommunication service was organized and implemented by the Ministry of industry and information technology and the Ministry of finance at the end of 2015. The central financial funds of the first three pilot projects led the investment of basic telecommunication enterprises to exceed 40 billion yuan, and supported the promotion of fiber-optic network access in 130000 administrative villages, including 43000 poverty-stricken villages. The pilot work has greatly improved the broadband network coverage level in rural and remote areas of China.

In June 2018, a new round of Universal Telecom Services was launched. As the "upgraded version" of universal telecom services, the Ministry of industry and information technology officially approved and determined to support 123 cities to implement the construction of 4G base stations in administrative villages, to meet the 4G network coverage needs of 12000 administrative villages, to support 23 cities to implement the construction of 4G base stations in border areas, to support Sansha city in Hainan Province to implement the construction of 4G base stations in islands and other resolutions.

On the basis of basic access to optical fiber networks, the Ministry of industry and information technology and the Ministry of Finance continue to deepen the pilot of universal telecommunication services, support the 4G network coverage in rural and remote areas, and strive to achieve the 4G network coverage rate in administrative villages of more than 98% by 2020.

The 4G coverage of administrative villages is more than 98%, which is an impossible task for other countries in the world. At the same time of 4G coverage, optical fiber coverage is also realized in most areas. However, in the harsh environment like cliff village at the beginning of this paper, microwave back transmission is the best way to achieve the purpose of universal telecommunication service quickly and cheaply.

Build 5g microwave

With the development of 5g, universal service will expand to 5g coverage in a few years. Maybe microwave echo will play its role again at that time, sending 5g services to a large number of remote areas and sparsely populated areas.

(2) Microwave echo in industry service

5g enables thousands of lines and hundreds of industries. In many industry application scenarios, especially where the optical fiber infrastructure is not perfect, microwave return can quickly and cheaply build 5g network environment for industry customers without waiting for optical fiber laying. For example, some video return scenes, including public security monitoring, power transmission and distribution monitoring, oil and gas production monitoring and other scenes, can be directly transmitted by microwave if they are in remote areas.

Take Huawei's airflash 5g enterprise microwave solution as an example, which has been implemented in security, subway, power and oil fields. In Zhoukou, Henan Province, through point-to-point microwave access to the video station, the safe city video system can be put into operation quickly; in Shenzhen Metro, the vehicle mounted 5g wireless monitoring video can be uploaded quickly through microwave mode, providing support for intelligent inspection and customer service; in Qinling UHV transmission monitoring application, the monitoring system can be provided with unmanned area visual information return through microwave scheme.

Finally, again, in the domestic environment, microwave back transmission can not replace fiber as the mainstream back transmission mode, but it does provide a low-cost and effective means for the rapid opening of 5g network and broadband network. 5g's commercial use is not only the 4G bandwidth upgrade, but also the emergence of more innovative formats, which may put forward more requirements for microwave echo.

www.whwireless.com


Categories
Hot Products
  • IOt LORA router antenna wireless gateway antenna

    4G FPC cutting antenna wireless gateway iot lora router antenna

    whwireless Wide Band FPC Embedded Antenna WH-4G-FPC4(cutting) provide an ideal solution for modem devices whether for domestic or business wireless data or for machine to machine 4G wireless embedded applications and connected devices. apply to 700-2700Mhz frequency range, 4G LTE 3G GPRS GSM WCDMA module come with IPEX or SMA customized.

  • SMA male  NMO3/4  LMR195 RFcable assembly

    the RF cable SMA male--NMO3/4 LMR195

    the RF cable SMA male--NMO3/4  RF Cable LMR195

  • CELLULAR WIFI IIOT ROUTER Antenne

    4G iot small dimension high performance magnet antenna

    4G iot small dimension,high performance 4G M2M antenna; pole copper material;high performance; Easy install Mounting magnet bast One time die casting IP67 waterproof antenna base; is a compact, high performance, magnetic mount antenna suitable for use with any 4G LTE compatible modem or gateway. comes with a magnetic base for temporary mounting situations and performs across six major cellular, GSM, and LTE bands supporting 2G, 3G and 4G cellular technologies.

  •  5G 4G 3G 2G 8dbi antenna

    transceiver 8km distance 5G 4G 3G 2G 8dbi dual polarization M2M&IoT antenna

    This high gain multiband 5G 4G omni antenna WH-5G-MM8x2 is designed for 700MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) 4800MHz(5G) frequency band transceiver 8km distance and supports all established standards like GSM, 2G, 3G and 4G 5G(800 / 900 / 1800 / 2100 / 2600/4800).The antenna WH-5G-MM8x2 has a gain of up to 8dBiX2 and helps you to improve your 2G, 3G or 4G /5G connection even on long distances. Cable Optionally we offer a pair of antenna cables of type RG58U with a length of 2.5m, 5m, 10m and 15m with N male to SMA male (fits to the most common LTE routers ) connectors. stainles steel 304 for all "L" bracket and U bolt mounting screw kit ;allow working for marine

  • 4G and GPS FPC  router antenna

    4G and GPS FPC antenna wireless gateway iot lora router antenna

    This FPC 4G antenna WH-4Gps-FPC8 is designed for 800MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) frequency band and supports all established standards like GSM, 2G, 3G and 4G (800 / 900 / 1800 / 2100 / 2600). and GPS 1575.42MHz Easy install 3M adhesive mounting.

  • multiband 5G 4G 3G 2G  antenna

    omni 5G 4G 3G 2G 6dbiX2 dual polarization M2M&IoT antenna

    This high gain multiband 5G 4G omni antenna WH-5G-ST6x2 is designed for 700MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) 4800MHz(5G) frequency band and supports all established standards like GSM, 2G, 3G and 4G 5G(800 / 900 / 1800 / 2100 / 2600/4800).The antenna WH-5G-MM8x2 has a gain of up to 8dBiX2 and helps you to improve your 2G, 3G or 4G /5G connection even on long distances. Cable Optionally we offer a pair of antenna cables of type RG58U with a length of 2.5m, 5m, 10m and 15m with N male to SMA male (fits to the most common LTE routers ) connectors.

  • GNSS 5G 4G LTE iot  WiFi mimo 6 in 1  antenna

    Outdoor Vehicle Combo Antenna 6 in 1 antenna

    Built in X6 MIMO high power vertical antennas 5G NR WH-MIMO-04X6 is a range of high-performance 6 MiMo antennas covering 698-960/1710-3800MHz with optional GPS/GNSS and optional LTE; wifiX5 or LTEX4 or GNSS and wifi LTE X6 MiMo/Diversity at 2.4/5.0GHz. Easy install come with M22 OR M28 screw customized;IP67 waterproof design and Between Antenna and installation cabinet come with waterproof rubber ring

  • 5G NR LTE mimo high gain omni MiMo antenna

    5G 4G CBRS LTE mimo 6dbi X2 short omni MiMo antenna

    4G & 5G External CBRS Antenna designed to boost network coverage in buildings;omni antenna 200mm small dimension Comes with 5 meters of low loss cable terminated with an  SMA male connector. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. apply to outdoor environment.IP67

  • MiMo 6 x6 2G 3G 4G 5G DVBT WiFi GNSS Vehical antenna

    MiMo 6x6 2G 3G 4G 5G DVBT WiFi GNSS Vehical antenna

    1. Introduction This antenna is a heavy-duty, fully IP67 waterproof external M2M antenna for use in telematics, transportation and remote monitoring applications. It is unique in the market because it with high efficiency in a compact format. This antenna screws down in permanently onto a roof or metal panel and can be pole or wall-mounted For industries such as commercial vehicle telematics, remote monitoring, smart meter systems and construction equipment, it provides a robust, rugged antenna that is durable, even in extreme environments The antenna is a nine port antenna with two elements designed to cover the 617-6000MHz cellular bands, two elements designed to cover the 2.4-2.5 and 4.9-6 GHz WLAN and DVBT  bands and one GNSS element. The antenna can be mounted on the roof of a vehicle or fixed structure. The antenna meets or exceeds a variety of environmental ruggedization specifications for transportation applications. This antenna is an omni-directional heavy-duty, fully IP67 waterproof external M2M antenna for use in  telematics, transportation and remote monitoring applications. The antenna has its own ground-plane and can radiate on any mounting environment like metal or plastic without affecting performance. The cables are low loss allowing for lengths of up to 4 meters , critical for buses, trains and other commercial transport applications.Customized cables and connectorversion available

  • UHF 433 MHz RFID Circular Polarized Patch Antenna

    433MHz circular polarization RHCP flat panel antenna

    RFID Right Hand Circular Pol Flat Panel Antenna, with 1 N-female connector. Frequency 428-438 MHz, High Gain of 9 dBi. Dimensions are 450X450X110(MM). Weight is 2Kg.

Get In Touch
  • Wellhope wireless Communication equipment Ltd(China):

    No.8, Bidi Road Xinan Street SanShui District FoShan City, Guangdong , China

  • Have a Questions? Call Us

    Tel : 0086 757 87722921

  • Contact With Us

    Email : wh@whwireless.com

    Email : kinlu@whwireless.com

    Whatsapp : 008613710314921

Follow Us :

Facebook Twitter Linkedin Youtube TikTok VK
Send a Message
welcome to Wellhope Wireless

Online Service

Home

Products

News

contact