Wireless Mobility and Load Balancing

2.5dbi RP SMA Φ8×110mm ROHS Wireless Router antenna

2dBi SMA GPS GSM combine antenna,terminal ntenna

white version SMA male φ14×207 MM terminal antenna 

CCTV transmission antenna

RP TNC male wlan 5GHz wideband antenna Φ12×143mm

1:whwireless DAS panel antenna model WH-4G-BP9X3 offer The High Beam High Power Wide Band 600-2700MHz 9dBi Cellular 4G 3G LTE Directional Antenna is compatible with the vast majority of carrier bands and frequencies 2:Professional, robust directional antennas with high gain, also suited for very long cables;Various RF cable lengths available 3:Professional directional antennas for the LTE full Band (700-2700MHzMHz).The 4G LTE  antennas WH-4G-BP9X3 offer 8 or 9dBi gain (per internal antenna), are weather proof and suitable for mast installation. Connectors are N female  suitable cables for many LTE routers

A splitter RF cable can be used to connect an antenna to a 5G modem. One end of the cable is connected to the antenna, which receives and transmits radio - frequency signals. The other two ends are connected to the 5G modem. This setup is crucial for enhancing the signal reception and transmission capabilities of the 5G modem. In a 5G network, the antenna captures the high - frequency 5G signals from the base station. The splitter RF cable then effectively distributes these signals to the 5G modem. This allows the modem to process the signals and provide high - speed internet connectivity. It's important to ensure proper installation and compatibility between the cable, antenna, and 5G modem to optimize performance and avoid signal loss.

WHWIRELESS 433MHz Yagi antenna with a gain of 12dBi, such as the WH-433-YD12 shown, operates at 433MHz. It has dimensions of 780X390X60mm and comes with a 5 - meter RG58 cable. In industrial settings, this antenna is highly effective. Its directional nature allows for focused signal transmission and reception, reducing interference. It can be used for wireless data communication between factory buildings, facilitating real - time monitoring of equipment, like sensors in the depicted industrial plant. The 12dBi gain enables it to extend the communication range, making it suitable for large - scale industrial areas, ensuring reliable connection for applications such as remote control of machinery and automated systems.