MIMO Antenna
Multi-antenna types Mar,7 2019

Multi-antenna types

Multi-antenna MIMO (or Single user MIMO) technology has been developed and implemented in some standards, e.g., 802.11n products.

SISO/SIMO/MISO are special cases of MIMO

Multiple-input and single-output (MISO) is a special case when the receiver has a single antenna.

Single-input and multiple-output (SIMO) is a special case when the transmitter has a single antenna.

Single-input single-output (SISO) is a conventional radio system where neither transmitter nor receiver has multiple antenna.

Principal single-user MIMO techniques

BellLaboratories Layered Space-Time (BLAST), Gerard. J. Foschini (1996)

Per Antenna Rate Control (PARC),Varanasi, Guess (1998), Chung, Huang, Lozano (2001)

Selective Per Antenna Rate Control (SPARC), Ericsson (2004)

Some limitations

The physical antenna spacing is selected to be large; multiple wavelengths at the base station. The antenna separation at the receiver is heavily space-constrained in handsets, though advanced antenna design and algorithm techniques are under discussion. Refer to: multi-user MIMO

Multi-user types

Main article: Multi-user MIMO

Recently, results of research on multi-user MIMO technology have been emerging. While full multi-user MIMO (or network MIMO) can have a higher potential, practically, the research on (partial) multi-user MIMO (or multi-user and multi-antenna MIMO) technology is more active.

Multi-user MIMO (MU-MIMO)

In recent 3GPP and WiMAX standards, MU-MIMO is being treated as one of the candidate technologies adoptable in the specification by a number of companies, including Samsung, Intel, Qualcomm, Ericsson, TI, Huawei, Philips, Nokia, and Freescale. For these and other firms active in the mobile hardware market, MU-MIMO is more feasible for low-complexity cell phones with a small number of reception antennas, whereas single-user SU-MIMO's higher per-user throughput is better suited to more complex user devices with more antennas.

Enhanced multiuser MIMO: 1) Employs advanced decoding techniques, 2) Employs advanced precoding techniques

SDMA represents either space-division multiple access or super-division multiple access where super emphasises that orthogonal division such as frequency and time division is not used but non-orthogonal approaches such as superposition coding are used.

Cooperative MIMO (CO-MIMO)

Uses multiple neighboring base stations to jointly transmit/receive data to/from users. As a result, neighboring base stations don't cause intercell interference as in the conventional MIMO systems.

Macrodiversity MIMO

A form of space diversity scheme which uses multiple transmit or receive base stations for communicating coherently with single or multiple users which are possibly distributed in the coverage area, in the same time and frequency resource.

The transmitters are far apart in contrast to traditional microdiversity MIMO schemes such as single-user MIMO. In a multi-user macrodiversity MIMO scenario, users may also be far apart. Therefore, every constituent link in the virtual MIMO link has distinct average link SNR. This difference is mainly due to the different long-term channel impairments such as path loss and shadow fading which are experienced by different links.

Macrodiversity MIMO schemes pose unprecedented theoretical and practical challenges. Among many theoretical challenges, perhaps the most fundamental challenge is to understand how the different average link SNRs affect the overall system capacity and individual user performance in fading environments.

MIMO Routing

Routing a cluster by a cluster in each hop, where the number of nodes in each cluster is larger or equal to one. MIMO routing is different from conventional (SISO) routing since conventional routing protocols route node-by-node in each hop.

Massive MIMO

a technology where the number of terminals is much less than the number of base station (mobile station) antennas. In a rich scattering environment, the full advantages of the massive MIMO system can be exploited using simple beamforming strategies such as maximum ratio transmission (MRT),]maximum ratio-combining (MRC) or zero forcing (ZF). To achieve these benefits of massive MIMO, accurate CSI must be available perfectly. However, in practice, the channel between the transmitter and receiver is estimated from orthogonal pilot sequences which are limited by the coherence time of the channel. Most importantly, in a multicell setup, the reuse of pilot sequences of several co-channel cells will create pilot contamination. When there is pilot contamination, the performance of massive MIMO degrades quite drastically. To alleviate the effect of pilot contamination, the work of proposes a simple pilot assignment and channel estimation method from limited training sequences. However, in 2018 research by Emil Björnson, Jakob Hoydis, Luca Sanguinetti was published which has shown that pilot contamination is soluble and have found that capacity of a channel can always be increased, both in theory and practice by increasing the number of antenna.

Wellhope Wireless manufacture based in 4G; MIMO;GPS Dielectric Antenna;GSM;3G;Wlan;LTE antenna and RF pigtail cable; more question or inquire feel free to sent us email; wh@wellhope-wireless.com.

Categories
Hot Products
  • IOt LORA router antenna wireless gateway antenna

    4G FPC cutting antenna wireless gateway iot lora router antenna

    whwireless Wide Band FPC Embedded Antenna WH-4G-FPC4(cutting) provide an ideal solution for modem devices whether for domestic or business wireless data or for machine to machine 4G wireless embedded applications and connected devices. apply to 700-2700Mhz frequency range, 4G LTE 3G GPRS GSM WCDMA module come with IPEX or SMA customized.

  • SMA male  NMO3/4  LMR195 RFcable assembly

    the RF cable SMA male--NMO3/4 LMR195

    the RF cable SMA male--NMO3/4  RF Cable LMR195

  • CELLULAR WIFI IIOT ROUTER Antenne

    4G iot small dimension high performance magnet antenna

    4G iot small dimension,high performance 4G M2M antenna; pole copper material;high performance; Easy install Mounting magnet bast One time die casting IP67 waterproof antenna base; is a compact, high performance, magnetic mount antenna suitable for use with any 4G LTE compatible modem or gateway. comes with a magnetic base for temporary mounting situations and performs across six major cellular, GSM, and LTE bands supporting 2G, 3G and 4G cellular technologies.

  •  5G 4G 3G 2G 8dbi antenna

    transceiver 8km distance 5G 4G 3G 2G 8dbi dual polarization M2M&IoT antenna

    This high gain multiband 5G 4G omni antenna WH-5G-MM8x2 is designed for 700MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) 4800MHz(5G) frequency band transceiver 8km distance and supports all established standards like GSM, 2G, 3G and 4G 5G(800 / 900 / 1800 / 2100 / 2600/4800).The antenna WH-5G-MM8x2 has a gain of up to 8dBiX2 and helps you to improve your 2G, 3G or 4G /5G connection even on long distances. Cable Optionally we offer a pair of antenna cables of type RG58U with a length of 2.5m, 5m, 10m and 15m with N male to SMA male (fits to the most common LTE routers ) connectors. stainles steel 304 for all "L" bracket and U bolt mounting screw kit ;allow working for marine

  • 4G and GPS FPC  router antenna

    4G and GPS FPC antenna wireless gateway iot lora router antenna

    This FPC 4G antenna WH-4Gps-FPC8 is designed for 800MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) frequency band and supports all established standards like GSM, 2G, 3G and 4G (800 / 900 / 1800 / 2100 / 2600). and GPS 1575.42MHz Easy install 3M adhesive mounting.

  • multiband 5G 4G 3G 2G  antenna

    omni 5G 4G 3G 2G 6dbiX2 dual polarization M2M&IoT antenna

    This high gain multiband 5G 4G omni antenna WH-5G-ST6x2 is designed for 700MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) 4800MHz(5G) frequency band and supports all established standards like GSM, 2G, 3G and 4G 5G(800 / 900 / 1800 / 2100 / 2600/4800).The antenna WH-5G-MM8x2 has a gain of up to 8dBiX2 and helps you to improve your 2G, 3G or 4G /5G connection even on long distances. Cable Optionally we offer a pair of antenna cables of type RG58U with a length of 2.5m, 5m, 10m and 15m with N male to SMA male (fits to the most common LTE routers ) connectors.

  • GNSS 5G 4G LTE iot  WiFi mimo 6 in 1  antenna

    Outdoor Vehicle Combo Antenna 6 in 1 antenna

    Built in X6 MIMO high power vertical antennas 5G NR WH-MIMO-04X6 is a range of high-performance 6 MiMo antennas covering 698-960/1710-3800MHz with optional GPS/GNSS and optional LTE; wifiX5 or LTEX4 or GNSS and wifi LTE X6 MiMo/Diversity at 2.4/5.0GHz. Easy install come with M22 OR M28 screw customized;IP67 waterproof design and Between Antenna and installation cabinet come with waterproof rubber ring

  • 5G NR LTE mimo high gain omni MiMo antenna

    5G 4G CBRS LTE mimo 6dbi X2 short omni MiMo antenna

    4G & 5G External CBRS Antenna designed to boost network coverage in buildings;omni antenna 200mm small dimension Comes with 5 meters of low loss cable terminated with an  SMA male connector. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. apply to outdoor environment.IP67

  • MiMo 6 x6 2G 3G 4G 5G DVBT WiFi GNSS Vehical antenna

    MiMo 6x6 2G 3G 4G 5G DVBT WiFi GNSS Vehical antenna

    1. Introduction This antenna is a heavy-duty, fully IP67 waterproof external M2M antenna for use in telematics, transportation and remote monitoring applications. It is unique in the market because it with high efficiency in a compact format. This antenna screws down in permanently onto a roof or metal panel and can be pole or wall-mounted For industries such as commercial vehicle telematics, remote monitoring, smart meter systems and construction equipment, it provides a robust, rugged antenna that is durable, even in extreme environments The antenna is a nine port antenna with two elements designed to cover the 617-6000MHz cellular bands, two elements designed to cover the 2.4-2.5 and 4.9-6 GHz WLAN and DVBT  bands and one GNSS element. The antenna can be mounted on the roof of a vehicle or fixed structure. The antenna meets or exceeds a variety of environmental ruggedization specifications for transportation applications. This antenna is an omni-directional heavy-duty, fully IP67 waterproof external M2M antenna for use in  telematics, transportation and remote monitoring applications. The antenna has its own ground-plane and can radiate on any mounting environment like metal or plastic without affecting performance. The cables are low loss allowing for lengths of up to 4 meters , critical for buses, trains and other commercial transport applications.Customized cables and connectorversion available

  • UHF 433 MHz RFID Circular Polarized Patch Antenna

    433MHz circular polarization RHCP flat panel antenna

    RFID Right Hand Circular Pol Flat Panel Antenna, with 1 N-female connector. Frequency 428-438 MHz, High Gain of 9 dBi. Dimensions are 450X450X110(MM). Weight is 2Kg.

Get In Touch
  • Wellhope wireless Communication equipment Ltd(China):

    No.8, Bidi Road Xinan Street SanShui District FoShan City, Guangdong , China

  • Have a Questions? Call Us

    Tel : 0086 757 87722921

  • Contact With Us

    Email : wh@whwireless.com

    Email : kinlu@whwireless.com

    Whatsapp : 008613710314921

Follow Us :

Facebook Twitter Linkedin Youtube TikTok VK
Send a Message
welcome to Wellhope Wireless

Online Service

Home

Products

News

contact